Saturday 16 July 2011

Oakley Design Ferrari 458 Italia

Oakley Design Ferrari 458 Italia

It appears Stasis' tuned Audi R8 won't be the only European supercar to grace the Specialty Equipment Market Association show. Oakley Design, a firm noted mainly for tuning Porsches, revealed today it plans on bringing a customized Ferrari 458 Italia to next week's trade show.
Although Oakley has previously been tied to various Porsche projects, the company recently expanded its offerings to the new 458. In stock form, the Italia's 4.5-liter V-8 cranks out an impressive 570 horsepower and 398 pound-feet of torque, but Oakley's team believed they could improve upon Maranello's design. With a new intake system and a remapped engine computer, Oakley claims it was able to coax another 48 ponies and 20 pound-feet from the engine, bringing output to 618 horsepower and 418 pound-feet.
According to the tuner, the extra power helps thrust the 458 from 0-60 mph in a scant 3.0 seconds -- four-tenths of a second quicker than a stock Italia -- and to a top speed above the 205 mph mark. To help the driver retain control of the car at such speeds, Oakley's custom front and rear spoilers create an extra 99 and 55 pounds of downforce, respectively.
Oakley Design Ferrari 458 Italia Rear
To help set apart its 458 from stock cars, Oakley scrapped the standard five-spoke wheel in favor of giant HRE forged rims, which are both lighter and wider than the original hardware. Additionally, Oakley's blacked out portions of the A-pillar, roof, and decklid, allowing the 458's curved roofline to resemble a fighter jet's bubble canopy.
Oakley plans on building five 458s itself, one of which will be at SEMA next week. For those who already own a 458 but desire some of Oakley's touches, fear not -- the tuning shop insists it will offer these performance and cosmetic upgrades a la carte.














Oakley Design Ferrari 458 Italia
Oakley Design Ferrari 458 Italia
Oakley Design Ferrari 458 Italia

Nissan Townpod Concept

Nissan Townpod Concept

Nissan's Townpod  concept is aiming to be the Swiss Army Knife of electric vehicles, merging the best aspects of hatchbacks, SUVs, and vans into one practical (if not unusual) package.
Externally, designers blended a number of styling cues from the Cube and Leaf, lending the Townpod a tall, boxy stature, while simultaneously blessing it with a long, tapered nose. The small, elongated headlamps, along with the slender air intake opening, give the Townpod's front fascia an odd, alien-like appearance.
Although the Townpod is roughly the same size as the compact Leaf, Nissan worked hard to increase its versatility. Rear-hinged half-doors improve access to the rear seat, while access to the rear cargo area is provided by two swing-open panel doors. The rear bench folds flat and retracts into the front seating assembly, opening up a flat, unencumbered load floor. Those needing to carry very long items -- scaffolding and surfboards -- will likely need to pop open a roof-mounted hatch, located just above the rear cargo doors.
Nissan Townpod Concept Side Doors
Inside, the flowing dashboard takes the Jacuzzi Lounge design theme used in the Cube to a whole new level. The relatively bare dashboard has been stripped of all mechanical switchgear, leaving only a pair of LCD screens. Drivers will control ventilation, audio, and navigation systems through the lower (touch-sensitive) display, along with controls on the steering wheel. Bluetooth allows drivers to wirelessly connect to smartphones and audio devices, but Nissan's proud of what it calls The Puck -- a small, slotted rubber ball that can hold a number of accessories, including cell phone mounts, cup holders, bag hooks, and other paraphernalia.
Nissan won't say much about the electric drivetrain underneath (it's likely quite similar, if not identical, to that used in the Leaf), nor will it refer to the Townpod as anything but a conceptual design. Although this car itself may not make it to market, incorporating some of its versatile features into future vehicles could help make an electric-powered C-segment vehicle increasingly palatable to many customers.

Nissan Townpod Concept

 Nissan Townpod Concept

Nissan Townpod Concept

New F2011 Ford Mustangsolder

New F2011 Ford Mustangsolder

Ford's got quite the lineup planned for the 2010 Specialty Equipment Market Association show. In addition to a number of custom crossovers, Fiestas, and F-Series pickups, the automaker revealed it has allowed various aftermarket firms to craft nine 2011 Mustangs for the venue.
Ford Vehicle Personalization SEMA Mustang
 2011 Ford Mustang by Ford Vehicle PersonalizationFord's own accessories group was given a Mustang of its own to trick out. Apart from the custom white tri-coat paint, large wheels, and coral accents throughout both the interior and exterior, most of the parts, including the hood scoop, rear quarter louvers, and pedestal spoiler, are pulled straight from Ford's catalogs.

2011 Ford Mustang by Team Baurtwell
This is apparently a rapper's delight, as this Mustang was designed by Funkmaster Flex for none other than Snoop Dogg. The custom coupe looks quite a bit like a Shelby GT500, thanks to a white-on-blue paint job, 3dCarbon body kit, NC Forged three-piece billet wheels, and custom smoked taillamps.

MRT Ford Mustang SEMA Car

2011 Ford Mustang by MRT
Seeing as Scott Hoag, MRT's founder, has a long background in racing Mustangs, it's not too surprising to see that MRT's SEMA 'Stang receives some giddyup. The red-on-black 2011 Mustang GT, described by the firm as a "tough street warrior," receives a performance handling package, chassis reinforcements, upgraded brakes from Baer, and a custom, MRT-designed exhaust system.
Creations N Chrome Ford Mustang SEMA Car
 2011 Creations n' Chrome Mustang
Creations n' Chrome's Mustang is pink enough to make Barbie blush, but for a good cause. The tuning shop has apparently partnered with the American Cancer Society to raise awareness for breast cancer, and this retina-scorching Mustang GT will certainly catch people's attention. Apart from the wild color, the car receives vintage Shelby GT500-style driving lamps, Shelby-esque body and rocker stripes, a Vortech supercharger, large HRE aluminum wheels, and a Wilwood brake kit.
Mobsteel Ford Mustang SEMA Car
 2011 Ford Mustang by Mobsteel
Although many tuners opted to have their way with the new 2011 Mustang GT, Mobsteel chose to use a base 2011 Mustang V-6 as their canvas. Their slammed, black coupe looks utterly sinister, but a remote-mount turbo system and a Magnaflow exhaust system promise at least a slight power boost.
2011 Ford Mustang by Raceskinz
Hope you like composite materials. Raceskinz is primarily known for manufacturing a wide array of carbon fiber accessories, so it's not too surprising they've decked out their 2011 Mustang GT with all sorts of the woven composite. The company's added its custom front splitter, sport bucket seats, and rear seat delete kit, along with a ProCharger supercharger and intercooler.
Street Scene Ford Mustang SEMA Car
2011 Ford Mustang by Street Scene Equipment
This Mustang wears a number of accessories pulled right from Street Scene's catalog, including a new chin spoiler, grille insert, rear spoiler, and rear valance. Inside, the car receives Katzkin leather seating, along with a Polk audio system.
Tjin Edition Ford Mustang SEMA Car
2011 Ford Mustang by Tjin Edition
The work of independent designer Neil Tjin, this 2011 Mustang GT receives a custom paint color, along with a bespoke metal wing, Webasto sunroof, custom LED headlamps, and underbody neon lighting. The car is also treated to a full air suspension kit, coupled with anti-roll bars and trailing arms sourced from Eibach.
Muscle Mustangs And Fast Fords Ford Mustang SEMA Car
2011 Ford Mustang by Muscle Mustangs and Fast Fords
Ford invited this long-standing buff book to build -- what else? -- one muscle-bound Mustang. The 5.0-liter V-8 is treated to a Ford Racing supercharger kit, along with custom headers and exhaust. MM&FF's car also apparently receives some wide rear slicks and an elongated spoiler -- perfect for helping the car hook up on the drag strip.


 New F2011 Ford Mustangsolder
New F2011 Ford Mustangsolder
New F2011 Ford Mustangsolder

Mini Scooter E Concepts

Mini Scooter E Concepts

Just how mini can a Mini be? Quite small, apparently: the automaker's entertaining the notion of building an electric scooter, and to test the waters for such a device, three versions of the Scooter E concept are headed to the 2010 Paris Motor show.
Mini's moped is, predictably, an uncannily retro two-wheeler. The step-through design, front fender, and curved body all bear a striking resemblance to vintage Lambretta scooters. Appropriate, we suppose, given the Lambretta -- like the Mini itself -- was once tied to the British Mod scene in the 1960s. Minor cues, including the chrome trim on the leg shield, the round projector headlamp, spoiler-like grab handle, and twin taillights do help tie the Scooter E to its four-wheeled Mini siblings.
Mini Scooter E Concept Front Three Quarter
Like the Lambrettas of days past -- or today's Mini Cooper, for that matter -- the Scooter E appears to be a canvas ripe for personalization. The three scooters on Mini's display stand are mechanically identical to one another, but each is given a unique visual personality. The neon green-on-grey scheme is a blatant tie-in to the electric Mini E test vehicles, while the British Racing Green, and red/white/blue scooters channel the Minis and Mods of yesteryear, respectively.
Cosmetically, the Scooter E is a visual timewarp, but beneath the skin, it's a far cry from the oil-burning, two-stroke scooters of the 1960s. Motive power comes courtesy of an electric motor driving the rear wheel. Actually, it's mounted within the rear wheel itself, allowing designers a chance to simplify the exterior design and utilize additional space on the bike. As a result, the lithium-ion battery pack and an on-board charger are installed underneath the seat, although Mini's given no indication as to its range or charge times.
Mini Scooter E Concept Front Three Quarters
The advanced technology isn't limited to the powertrain, either. As the Scooter E is targeting young, tech-saavy hipsters, it's not too surprising to see an iPhone docking station built into the large speedometer display on the handlebars. The interface allows the iPhone to be used as an ignition key, navigation system, music device, and -- assuming you have a helmet with an integrated Bluetooth device -- a hands-free mobile phone. A rail system, much like that used in the new Countryman's center console, allows a variety of different attachments (i.e. cup holders, baskets, etc.) on the inside surface of the front fairing.
Is an electric scooter truly in Mini's future? The company isn't saying at this point, although it notes the eco-friendly driveline and "individual style" do jive with the brand's mantra. It also lines up nicely with parent BMW's Project I, which is working to develop multiple sustainable urban vehicles, including an electric cycle. Should reaction from Mini-philes and scooter nuts alike prove positive, it isn't unrealistic to see the Scooter E propped up in a Mini showroom in the years to come.









Mini Scooter E Concepts

Mini Scooter E Concepts


Mini Scooter E Concepts

Mazda3 and Mazdaspeed3 Special Editions

Add caption

Mazda has turned to its motorsports arm for its official 2009 SEMA Show factory efforts, creating a special edition Mazdaspeed3 and a 2.5L Mazda3, both of which take cues from the Mazda3 World Challenge racecar. Both 3s wear Crystal White Pearl, grey graphics, and details painted in black. Mazda says the design is a rework of the livery on the infamous 787B that took Le Mans in 1991.
Tri-Point Engineering, which races its own pair of Mazdas in the World Challenge series, upgraded the powertrain on the 2.5L Mazda3. With a Garrett GT2871R turbocharger pumping 10 psi, Mazda claims the mill sends 250-hp to the front wheels, and that the tune isn't finished yet. The Mazdaspeed3 gets only an AEM intake, but it's good for a claimed 20-hp boost.
2010 Mazdaspeed3 SEMA Side View
 The Speed3 lends its front brakes to the 2.5L 3. In return, it gets four-piston Stoptech calipers and floating two-piece rotors. Suspension upgrades consist of KW Suspension coilovers with modified top mounts on the front struts to increase camber.
The 2.5L 3, with the Speed3's brakes up front and Mazda5 brakes out back, gets a Tri-Point rear stabilizer bar and adjustable KW coilovers. Both cars sit on 19-in. wheels with Bridgestone Potenza RE050A rubber from the RX-8 R3.










 Mazda3 and Mazdaspeed3 Special Editions

Mazda3 and Mazdaspeed3 Special Editions

Mazda3 and Mazdaspeed3 Special Editions

Lotus Re-Launches Itself

Lotus Re-Launches Itself


Lotus's five-car launch of a range of sports cars spanning from 300 to 620 horsepower was one of the Paris highlights. The new cars signal Lotus's intention to reinvent itself, transforming from hardcore niche player to full-line, luxury-supercar grandee. It's a staggering turnaround plan, backed, Lotus says, by a billion-dollar investment. The new cars will be launched between mid-2012 and mid-2015.
2013 Lotus Esprit Front Three Quarters View
First down the pipe will be the 2012 Esprit, a mid-engined supercar powered by a V-8 making 550 horsepower in standard form, up to 620 in R trim. The motor is Lotus's heavy rework of the Lexus IS-F engine. The UK maker added a supercharger, and a new injection system, and revised the internals so it can rev to 8500. Direct gas injection is used for clean emissions at lower power, and at WOT it switches to port injection. Performance is claimed to match the Ferrari 458 and Porsche 911 Turbo, its key rivals. Not to mention that other new British supercar, the McLaren MP4-12C. But Lotus says it will undercut the Ferrari and McLaren because it recognizes that its brand is not as strong.
2013 Lotus Esprit Dash View
The Esprit's transmission is a seven-speed DCT, and Lotus also is working on an optional mild hybrid system. It uses regenerative braking to recharge a battery pack, and an 'e-boost' button on the steering wheel switches on an electric motor between the engine and transmission, giving a 50-horsepower helping hand. The system also allows idle-stop. The batteries are located in the structural tunnel between the seats, so the center of gravity is mostly unaffected.
As with all the cars in the new range, the Esprit utilizes Lotus's patent aluminum frame. But, for the first time in a Lotus, glass fiber is no longer used for the body panels. Instead, aluminum is used for the skin, because it gives better panel gaps and surface finish, as expected by buyers in this category. The Esprit uses carbon fiber side panels, and aluminum doors, roof, and front and rear ends. Lotus claims 3300 pounds dry weight. A convertible will be offered with standard and R engines and the hybrid.
Lotus Eterne Front View
Lotus also plans a front-engined pair of cars with the same 550/620-HP engine. The CY2014 Elite (see separate story) and CY2015 Eterne will rival the Ferrari California and Aston Martin Rapide, respectively. The two share a platform and powertrains, but the Eterne has a longer wheelbase at 196 inches overall. In both, the structure, panels, and suspension are all aluminum. The Eterne is the first four-door Lotus, and is said to be almost as spacious as a Porsche Panamera, and as good-looking as the Aston Martin Rapide.
To reinforce its low-consumption brand value, Lotus also plans hybrid options for the Elite and Eterne. But these front-engined cars will use a different system from the Esprit's. It's a full hybrid setup with an epicyclic transmission embodying two e-motors motors, and AWD. It's an adaptation of the Lexus LS600h system, showing how close the technical relationship is between Lotus and Toyota. Gas mileage is said to improve by 40 percent.
2014 Lotus Elan Front Three Quarters View
If the longitudinal V8-engined Esprit tackles the 911 Turbo, Lotus is fielding a late-2013 transverse-V6 car called the Elan as a rival for the 911 Carrera and Carrera S. It will run a 4.0-liter supercharged direct-injection version of the existing Evora engine, for 400HP (base) and 470HP (R). The Esprit's mild hybrid system will also be available on the Elan, as will a convertible body. The Elan will in effect replace the Evora, although at a higher price and power, so the Evora will continue as long as there are buyers. Lotus acknowledges that the Evora has failed to attract new fans from outside the brand, because it doesn't have the required sense of luxury, and ingress/egress difficulty is often cited by consumers who go back to Porsche.
So while the Elan uses the basic Evora tub, it will be modified for better owner convenience. Aluminum panels will help the quality impression. But Lotus insists the largely carryover chassis will maintain the Evora's frankly sublime handling, steering, and ride.
2015 Lotus Elise Front Three Quarters
The final new model is the new Elise, due in mid-2015. This one gains around 450 pounds over the present featherweight, and many thousand dollars in cost. It uses a 2.0-liter Toyota-derived four, with either supercharging or turbo-"we still have time to decide," the engineers say-for 300 (base) and 350HP (R). Porsche engineers have hinted they will do a four-cylinder Boxster next time around, so having a four-banger shouldn't handicap Lotus. And the mild hybrid system will be available in the new Elise, for class-leading economy as well as performance. The new Elise will come as a convertible and a hardtop (as will the Esprit and the Elan), aimed square at the Boxster and Cayman. But Lotus promises there will also be lightweight, bare-butt variants of the Elise to keep the track-biased hardcore buyers in the fold.
All the new models will share a digital dash, featuring a 12-inch TFT screen and virtual graphical dials and displays. Graphics will be different for the different models. In the Eterne, they will emphasize the navigation, while the Esprit driver will be able to call up track maps and a lap timer. Another shared technology across models is adaptive-damped suspension.
Each model will have a different interior, emphasizing lightweight materials in the Elise but more luxurious finishes in the Elite and Eterne.
2015 Lotus Elise Dash
So what has caused this storm of activity from the quiet little British sports-car maker? It was do or die, the management says. Owner Proton had gotten to the end of the road with Lotus' previous method of operation, which had lost money for the entire 15 years as a subsidiary.
So it engaged Dany Bahar, who had previously run sales, marketing and branding and commercial matters at Ferrari. Bahar realized that 15-20 years ago, Lotus was a leading Formula One constructor, and its Esprit Turbo and V8 were at the forefront of entry-level supercars. James Bond drove an Esprit. Lotus as a brand was on par with Ferrari, Lamborghini, and Aston Martin. But those automakers' owners invested heavily, and Lotus's owners did not.
2015 Lotus Elise Interior
With more than $1 billion from Proton and the bankers, this new roadmap is designed to put Lotus right and replicate their growth. Bahar wants to sell 7000-8000 cars a year by 2015, across the five models, which he regards as conservative, and says the company will be at break even by then even if sports car markets don't recover from today's flattened level.
Lotus Eterne Front Three Quarteres View
But even with that investment, Lotus needs expertise. Up to last year it had almost no marketers on staff, and a paucity of production experts for cars of the planned level of complexity and luxury. So Bahar has engaged 23 senior people in these disciplines-plus design and product development experts-from Ferrari, Porsche, Aston Martin, and AMG Mercedes.
It has also engaged a panel of part-time advisors including Bob Lutz, Burkhard Goeschel (ex product and purchasing chief at BMW), and Tom Purves (ex-CEO Rolls-Royce and previously CEO of BMW North America).
Even if it's been done before-Aston Martin built fewer than 50 cars in 1991-it's a staggeringly audacious plan.





 Lotus Re-Launches Itself


Lotus Re-Launches Itself

Lotus Re-Launches Itself